Tracking down the cause of stainless steel screw fracture

Editor:Jiaxing UNITEK Machinery Technology Co., Ltd. │ Release Time:2021-11-10 

For the fracture of ferrous screws, it is very easy to encounter in practical applications. However, the fracture of stainless steel screws is rarely seen. The reason is that the material of the stainless steel wire itself is relatively hard, so the general fracture of stainless steel screws rarely occurs. However, stainless steel screws will still break under certain circumstances:

1. The material of stainless steel is poor. The stainless steel wire used is not of good quality, contains impurities, and is not pure enough, causing the hardness of the stainless steel material itself to fail to meet the requirements.

2. There are problems in the production process. There are certain problems in the entire production process, such as eccentric heads, which will reduce the hardness of the finished stainless steel screw.

3. The operation of the product is not standardized. Customers use too much force during use. Generally, you can test the breaking force before use and adjust the torque.

However, the reasons for the fracture of stainless steel screws are definitely more than these, and the specific reasons still need to be analyzed in detail. But from these reasons, we can get that a truly qualified stainless steel screw rarely encounters breakage. Choosing the right product is very important. The stainless steel screws of Jiaxing Hebang Technology are strictly controlled in terms of material and process, and will never let defective products flow into the market.